LIFELINE 200FT POLYSTEEL 6000LB PREM V

Description du produit

The Peakworks Premium Vertical Polysteel Lifeline is a 200 ft lifeline rated to 6000 lb minimum breaking strength, designed for the most demanding vertical fall protection applications requiring maximum reach and superior rope durability. Polysteel rope construction combines a polyester outer braid with an internal steel wire core, delivering the handling flexibility of a synthetic rope alongside the cut resistance, abrasion resistance, and tensile strength of a steel core. This construction makes it well suited for environments where ropes may contact sharp structural edges, abrasive surfaces, or other hazards that would compromise standard synthetic lifelines over extended lengths.

The 200 ft length provides the greatest vertical reach in the Peakworks polysteel lifeline lineup, making it appropriate for the tallest structures encountered in industrial and commercial applications including the tallest communication towers, wind turbines, tall storage tanks, multi-story construction, and offshore facilities. At this length, rope management and deployment planning are critical — the lifeline should be carefully staged and deployed to avoid kinking, tangling, or contact with abrasive surfaces or sharp edges along its full length, and a deployment plan should be established before work begins to manage the substantial rope length safely and efficiently. The premium designation reflects enhanced construction quality and performance characteristics compared to standard polysteel lifelines, making it appropriate for high-demand professional use where reliability over maximum rope lengths is essential.

This lifeline is intended for use as part of a complete personal fall arrest system with a compatible full-body harness, a rope grab device rated for polysteel rope and confirmed compatible with the lifeline's diameter, and a suitable anchor point capable of supporting fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. Inspect the full 200 ft length of the rope before each use for fraying, kinking, core wire protrusion, chemical damage, or any other deterioration, and remove from service immediately if any defects are found.

Material: Polysteel rope (polyester outer braid with steel wire core)

Compatible With: Rope grab devices rated and compatible with polysteel lifeline rope diameter Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems requiring maximum vertical reach Tallest communication tower and wind turbine climbing applications Tall storage tank, multi-story construction, and offshore facility applications Industrial facility work at height requiring maximum lifeline coverage

Key Features: 6000 lb minimum breaking strength 200 ft length for maximum vertical reach Polysteel construction: polyester outer braid with steel wire core Enhanced cut and abrasion resistance versus synthetic-only rope Premium construction for high-demand professional fall protection applications requiring maximum rope length

Note: Always verify rope grab compatibility with polysteel lifeline diameter and construction before use. Establish a rope deployment and management plan before work begins to safely handle the full 200 ft length. Carefully deploy and manage the full length to avoid kinking, tangling, or abrasive surface contact. Anchor above the work area to a suitable fall arrest anchor point. Inspect the full rope length before every use and retire from service upon detection of any damage or defect.