LIFELINES 310LB 60FT

Description du produit

The Peakworks Lifeline is a 60 ft vertical lifeline rated to 310 lb, designed for use in personal fall arrest systems on tall structures where substantial vertical reach is required. The 60 ft length provides coverage for a wide range of elevated work applications including communication towers, wind turbines, multi-story construction, tall storage tanks, and industrial facilities where the vertical distance from the anchor point to the working position requires a lifeline of this length. The 310 lb capacity accommodates workers within the specified weight limit including tools and equipment carried on the person.

This lifeline is intended for use as part of a complete personal fall arrest system in conjunction with a compatible full-body harness, a rope grab device compatible with the lifeline rope diameter and construction, and a suitable anchor point rated for fall arrest loads. The lifeline must be anchored above the work area and the rope grab positioned correctly on the line before work begins. At 60 ft in length, rope management during deployment and retrieval requires careful planning to prevent kinking, tangling, or contact with abrasive surfaces or sharp edges along the rope's full length. Fall clearance below the worker must be confirmed to be sufficient for the fall arrest system being used, accounting for rope grab travel, energy absorber deployment if applicable, harness stretch, and worker height.

Inspect the full length of the lifeline before each use for fraying, kinking, chemical damage, discoloration, or any other signs of deterioration. Remove from service immediately if any defects are identified. Always follow applicable fall protection regulations and the manufacturer's instructions when deploying this lifeline, and ensure a competent person has evaluated the fall clearance and system configuration before work begins.

Material: Rope construction (verify specific rope material and diameter with Peakworks product documentation)

Compatible With: Rope grab devices compatible with lifeline rope diameter and construction Full-body harnesses with dorsal D-ring fall arrest attachment Fall arrest anchor points rated for applicable loads

Uses: Vertical lifeline for personal fall arrest systems on tall structures Communication tower and wind turbine climbing applications Multi-story construction and tall industrial facility applications Tall storage tank and elevated structure work at height requiring 60 ft vertical reach

Key Features: 310 lb capacity 60 ft length for tall structure vertical lifeline applications For use as part of a complete personal fall arrest system Suitable for a wide range of tall structure and elevated work environments

Note: Always confirm the worker's total weight including tools and equipment does not exceed the 310 lb rated capacity before use. Plan rope deployment and management carefully to prevent kinking, tangling, or abrasive surface contact along the full 60 ft length. A competent person must confirm total fall clearance is sufficient before use. Verify rope grab compatibility with lifeline rope diameter and construction before use. Inspect the full rope length before every use and retire from service upon detection of any damage or defect.